Softub Control Panel

Control panel.

The water-proof panel helps you to easily adjust the desired water temperature as well as the intensity of the hydrojets.  The integrated jet-key is connected to a clock timer which automatically provides for 20 minutes of sparkling pleasure.

New Softub Control Panel Functionality

12 Hour Standby Mode

Your Softub spa is designed to be ready and waiting for you at your optimum temperature 24 hours a day.  However, if you generally only use the spa during a 12 hour window, you can set it to run in standby mode for the other 12 hours.

To activate 12 hour standby mode, press & hold "Jets", "Light", & "Temp+" buttons for 10 seconds.  The next 12 hours will then be standby (pump/jets will not run).  The following 12 hours will be normal.  To deactivate, do the same but use the "temp-" button.
 
Heats to 41°C!
 
Over the years, the maximum obtainable temperature has increased.  Our technology now heats the Softub up to a maximum of 41°C. The control panel is normally limited to 40°, but to activate the 41° mode press "Jets" and "Temp+" for 10 seconds. "SP1" will flash every 5 seconds to inform you when you have activated this mode.
 
Energy saving mode
 
This fantastic latest innovation from Softub will dramatically decrease running costs when used making it now wonderfully economical.  Please note, this tech is in addition to re-claiming heat from the pump rather than using a seperate heating element. Energy saving mode also now allows you to set a specific time day that you require the tub to be hot, allowing it to slowly decrease in temperature the rest of the time. 

To activate energy saving mode, press "Light" and "Temp+" button for 10 seconds until "24" flashes.  The filter led will flash every 10 seconds to inform you that you have activated this mode.   This mode gets the tub to preset temperature once a day.

Our existing control panel technology