Vinyl Repair Kit for Pool

Suitable for any vinyl or inflatable pool. 
(Can also be used to fix vinyl spas).

Contents:
3 x 15cm Vinyl Repair Patches
1 x Clear Patch
1 fl.oz Underwater Glue
1 x Dauber Applicator

Repairs cuts, tears, and holes in spa liner by bonding the patch and the original vinyl together.  This is a high strength, fast drying system for underwater or dry use.

Instructions for use:
1.  When repairing, we recommend draining pool first.  Clean all surfaces thoroughly.  Use rubbing alcohol or high strength cleaner.  DO NOT USE SOAP.  If practical, drain water from pool to the level of the damaged area.  When possible, always patch from the underneath side of the liner.
2.  Always use a big patch.  If you are patching around an outlet, use a complete patch, allow to dry, then re-cut the hole for the outlet fitting.
3.  For spa or pool liners: Apply adhesive liberally to surface of both vinyl pieces to be bound.  Let stand for 2-4 minutes.  Press glued edges together, squeeze out air bubbles and smooth the patch.  Allow to dry overnight.
4.  For underwater repairs: Apply adhesive to patch liberally and fold patch in half upon itself.  When you reach the damaged area underwater, unfold patch and apply immediately to the liner.  Squeeze out air bubbles and smooth the patch.  Do not disturb for at least 12 hours.
5.  For inflatables and other vinyl items:  Apply adhesive lightly to patch.  Press tightly to surface to be repaired.  Hold in place for 2-3 minutes.  Allow to dry for 12 hours.