Blue Horizons Non Chlorine Shock

- Chlorine free shock granules
- Restores water sparkle
- Destroys swimmer wastes
- Part of the System

How to apply non-chlorine shock:

1. Maintain pH levels within the ideal range 7.2 – 7.6. If the level is not in this range, adjust.

2. Maintain free chlorine levels in the range pools: 1 – 3mg/l (ppm); spas 3 - 5mg/l (ppm). Maintain bromine levels in the range pools/spas: 3 – 5mg/l (ppm).

3. Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product of 2.2 gallon (10 litres) in water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool or spa whilst the pump (s) are turned ‘on' preferably near the water inlets to aid distribution.

4. After shock treatment procedure, allow at least 30 minutes before bathing recommences.

Dose rates

Litres       Gallons       Dose rate
1,000       220           11g
2,000       440           22g
4,545       1,000        50g
22,700      5,000        250g
45,450      10,000      500g